Info Wanted for CheeHo to Quote Your Inquiry

 

Please offer the details as follows when you are sending an inquiry or placing an order:

 

For Prepainted Steel

 

Name of Product:  e.g. Prepainted Galvalume Steel (PPGL), Prepainted Galvanized Steel (PPGI)

Grade:  e.g. TDC51D+AZ, TDC51D+Z, TDX51D+AZ, TDC51D+Z, TSGLCC, TSGCC

Usage:  e.g. corrugated board applied, sandwich panel used.

Specification:  e.g. 0.40*1219*C (thickness*width*coil)

Tolerance of Size:  e.g.  ±0.04mm for Thickness, 2mm for Width

Weight Tolerance:  e.g. ±5%

Weight of Dip Coating:  e.g. 150g/m² (for any special requirement, please provide clear indications)

Paint Thickness:  e.g. 25μm for front side (bottom + top), 10μm for back side

Paint Color:  e.g. RAL9002 (provide us with the RAL number or with your sample)

Surface Treatment:  e.g. AFP (anti finger print) & Protective Film

Coil Weight:  e.g. 5MT (3-8MT is recommended)

Quantity Wanted:  e.g. 200MT (there is a MOQ of 50MT here)

Packing Method:  e.g. Eye to Wall (vertical or horizontal)

Expected Lead time:  e.g. Within 30days after L/C (confirmed lead time will be stated in the contract and the L/C)

 

For Hot Dip Galvalume/Galvanized Steel

 

Name of Product:  e.g. Hot Dip Galvalume Steel (HDGL)/Hot Dip Galvanized Steel (HDGI)

Grade:  e.g. DC51D+AZ, SGLCC/DC51D+Z, SGCC

Usage:  e.g. Construction Applied, Substrate Used.

Specification:  e.g. 0.40mm*1219mm*C (thickness*width*coil)

Tolerance of Size:  e.g. ±0.04mm for Thickness, 2mm for Width

Weight Tolerance:  e.g. ±5%

Weight of Dip Coating:  e.g. 275g/m² (for any special requirement, please provide clear indications)

Surface Treatment: AFP (anti finger print) & Protective Film

Coil Weight:  e.g. 5MT (3-8MT is recommended)

Quantity Wanted:  e.g. 200MT (there is a MOQ of 50MT here)

Packing Method:  e.g. Eye to Wall (vertical or horizontal)

Expected Lead time:  e.g. Within 30days after L/C (confirmed lead time will be stated in the contract and the L/C)

 

For Silicon Steel

 

Name of Product:  e.g. Cold Rolled Non Grain Oriented Silicon Steel (CRNGO), Electrical Steel

Grade:  e.g. 50AW800

Usage:  e.g. Generators

Specification:  e.g. 0.5mm*1100mm*C (thickness*width*coil)

Tolerance of Size:  e.g. ±0.03mm for Thickness, 0~﹢1.5mm for Width

Weight Tolerance:  e.g. ±5%

Iron Loss Required:  e.g. No more than 5W/Kg (f=50Hz B=1.5T)

Magnetic Flux Strength Requirement:  e.g. 1.703T ((f=50Hz H=5000A/M))

Coil Weight:  e.g. 5MT (3-8MT is recommended)

Quantity Wanted:  e.g. 200MT (there is a MOQ of 50MT here)

Packing Method:  e.g. Eye to Wall (vertical or horizontal)

Expected Lead time:  e.g. Within 30days after L/C (confirmed lead time will be stated in the contract and the L/C)

 

For Cold Rolled Steel

 

Name of Product:  e.g. Cold Rolled Steel Coil

Grade:  e.g. SPCC

Steel Type:  e.g Bright annealed

Usage:  e.g. Construction applied, substrate used.

Margin Status:  e.g. Mill edge (EM), cut edge (EC)

Surface Treatment:  e.g. Slightly oiled

Specification:  e.g. 0.45mm*914mm*C (thickness*width*coil)

Tolerance of Size:  e.g. ±0.03mm for Thickness, 0~﹢1.5mm for Width

Weight Tolerance:  e.g. ±5%

Coil Weight:  e.g. 5MT (3-8MT is recommended)

Quantity Wanted:  e.g. 200MT (there is a MOQ of 50MT here)

Packing Method:  e.g. Eye to Wall (vertical or horizontal)

Expected Lead time:  e.g. Within 30days after L/C (confirmed lead time will be stated in the contract and the L/C)

 

For Electrolytic Tinplate

 

Name of Product:  e.g. Electrolytic Tinplate (ETP), Tinplate, Tin Coated Plate

Grade:  e.g. SPTE

Steel Type of Base Metal:  e.g. MR

Usage:  e.g. Used or  beverage cans

Specification:  e.g. 0.18mm*850mm*980 (thickness*width*length)

Tolerance of Size:  e.g. ±0.01mm for Thickness, 0~﹢3mm for Width

Temper:  e.g. T3

Weight of Tin Coating:  e.g. 2.8/2.8g/m²

Surface Treatment:  e.g. Bright

Printed Tinplate:  If printed tinplate is needed, please provide us with samples

Weight Tolerance:  e.g. ±5%

Coil Weight:  e.g. 5MT (3-8MT is recommended)

Quantity Wanted:  e.g. 200MT (there is a MOQ of 50MT here)

Packing Method:  e.g. Eye to Wall (vertical or horizontal)

Expected Lead time:  e.g. Within 30days after L/C (confirmed lead time will be stated in the contract and the L/C)

 

For Aluminum Profile

 

Name of Product:  e.g. Aluminum Profile

Usage:  e.g. Solar panel frames

Alloy designation:  e.g. 6005

Temper:  e.g. T4

Technical Drawings:  Preferably CAD files or other files with detailed specs

Surface treatment:  e.g. Anodizied black

Quantity wanted:  Normally for mould-opening-needed product, our MOQ is 1 ton

Expected Lead time:  e.g. Within 30days after L/C (confirmed lead time will be stated in the contract and the L/C)

 




Copyright © 2012-2020 CheeHo.cn All Rights Reserved.
苏ICP备1204750号
Loading...